Using wedge-loaded compact tension specimens for investigating hydrogen-induced cracking.
A. Jabbari Mostahsan, Z. Silvayeh, P. Auer, Thomas Stöhr, J. Domitner
2026.2.19Scientific Reports
Paper details
- Journal
- Scientific Reports
- Published
- 2026.2.19
- Citations
- 0
- References
- 34
- Fields
- Engineering, Materials Science, Medicine
Abstract
Constant displacement loading under gaseous charging at elevated pressure over a long time is a convenient method for determining the resistance of materials against hydrogen-induced cracking (HIC). This work investigates the feasibility of using compact tension (CT) specimens loaded by double-tapered wedges, as the combination of CT specimens and wedge loading benefits not only from small specimens that can be easily manufactured, but also from a straightforward loading method. As recalculating the applied stress intensity factor (SIF) after HIC testing is challenging for a wedge-loaded CT specimen, an experimental-numerical method is proposed for determining the SIF. Firstly, the separation load between the wedge and the specimen was experimentally obtained from a lift-off curve and, secondly, a correction factor calculated using finite element analysis (FEA) was applied to predict the equivalent contact load between the wedge and the specimen. To verify the proposed approach, the threshold SIF ($$\:{K}_{IH}$$) of high-strength steel (HSS) DIN 55NiCrMoV7 in gaseous hydrogen was determined using wedge-loaded CT specimens as well as standard bolt-loaded compact specimens. The comparison of $$\:{K}_{IH}$$ obtained with both types of specimens revealed a good agreement, which confirmed the feasibility of the proposed method.
Citation format
MOSTAHSAN, A. Jabbari, et al. Using wedge-loaded compact tension specimens for investigating hydrogen-induced cracking. Scientific Reports, 2026.